Scandium (III) Iodide SDS – ProChem, Inc. PAGE 1 SECTION 1 PRODUCT AND COMPANY INFORMATION PRODUCT NAME: Scandium (III) Iodide PRODUCT NUMBER: 3138 CAS NUMBER: 14474-33-0 SYNONYMS: Scandium triiodide anhydrous MANUFACTURER: Prochem, Inc. PHONE: 815-398-1788 826 Roosevelt Road FAX: 815-398-1810 Rockford, IL 61109 TOLL FREE: 800-795-8788 IN CASE OF TRANSPORTATION EMERGENCY CONTACT CHEM-TREC: 1-800-424-9300 SECTION 2 HAZARDS IDENTIFICATION CLASSIFICATION OF SUBSTANCE OR MIXTURE Pictogram Signal Word Warning Hazard Statements H315 Causes skin irritation H319 Causes serious eye irritation H335 May cause respiratory irritation Precautionary Phrases P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/protective clothing/eye protection/face protection P302+P352 IF ON SKIN: Wash with plenty of soap and water. P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with waster for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. HMIS CLASSIFICATION: Health: 1 Fire: 0 Reactivity Hazard: 0 NFPA RATING: Health: 1 Flammability: 0 Reactivity Hazard: 0 SCANDIUM IODIDE PAGE 1 PAGE 2 SECTION 2 HAZARDS IDENTIFICATION (Cont.) EYE CONTACT: Causes serious eye irritation. SKIN CONTACT: Causes skin irritation. INHALATION: May cause irritation to respiratory tract. INGESTION: May cause irritation. SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS Formula: ScI3 Molecular Weight: 425.67 CHEMICAL NAME CAS# % Scandium Iodide 14474-33-0 100 SECTION 4 FIRST AID MEASURES EYE EXPOSURE: Flush eyes with water for at least 15 minutes. Seek medical attention. SKIN EXPOSURE: Immediately wash with plenty of water and wash soap for at least 15 minutes while removing contaminated clothing. Get medical attention if necessary. INHALATION: Remove to fresh air and keep at rest. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention if necessary. INGESTION: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. If conscious, wash out mouth with water. Get medical attention if necessary. SECTION 5 FIREFIGHTING MEASURES FLASH POINT: Product is not flammable AUTO IGNITION TEMPERATURE: Not available EXPLOSION LIMITS: Not available EXTINGUISHING MEDIUM: Use fire fighting measures that suit the surround fire. SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained, approved breathing apparatus and full protective clothing, including eye protection and boots. HAZARDOUS COMBUSTION AND DECOMPOSITION PRODUCTS: Scandium oxides and hydrogen iodide SECTION 6 ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS: Wear all appropriate equipment when using this material. Ensure adequate ventilation. ENVIRONMENTAL PRECAUTIONS: Prevent spillage from entering drains or allowing to be released into the environment. METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP: Isolate spillage. Sweep up and place in suitable container for disposal. SECTION 7 HANDLING AND STORAGE PRECAUTIONS FOR SAFE HANDLING: Wear appropriate personal protective equipment. Avoid contact with skin and eyes. Use with adequate ventilation. Wash thoroughly after using. Keep container closed when not in use. Avoid formation of dusts and aerosols. CONDITIONS FOR SAFE STORAGE: Store in cool, dry, and well-ventilated area. Store away from oxidizing agents, water, and moisture. Store under dry inert gas. Hygroscopic. Protect from humidity and water. SECTION 8 EXPOSURE CONTROLS AND PERSONAL PROTECTION EXPOSURE CONTROLS: Contains no substances with occupational exposure limit values. EYE PROTECTION: Wear chemical safety glasses or goggles and face shield. SKIN PROTECTION: Wear nitrile or rubber gloves, and a complete suit protecting against chemicals. VENTILATION: Provide local exhaust, preferably mechanical. RESPIRATOR: Use an approved respirator. ADDITIONAL PROTECTION: Provide eyewash stations, quick-drench showers, and washing facilities accessible to areas of use and handling. SCANDIUM IODIDE PAGE 2 PAGE 3 SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES COLOR AND FORM: Yellow or tan powder ODOR: No data available MOLECULAR WEIGHT: 425.67 BOILING POINT: No data available MELTING POINT: 945° C SPECIFIC GRAVITY: No data available VAPOR DENSITY: No data available SOLUBILITY: Soluble SECTION 10 STABILITY AND REACTIVITY STABILITY: Stable HAZARDOUS POLYMERIZATION: Will not occur CONDITIONS TO AVOID: Avoid moisture INCOMPATIBILITY: Strong oxidizing agents and strong acids DECOMPOSITION PRODUCTS: Scandium oxides and hydrogen iodide SECTION 11 TOXICOLOGICAL DATA ACUTE TOXICITY: Not available CARCINOGENIC EFFECTS: No components of this product present at levels greater than or equal to 0.1% is identified a carcinogen. MUTAGENIC EFFECTS: Not available TETRATOGENIC EFFECTS: Not available To the best of our knowledge the toxicological effects of this compound have not been fully investigated. SECTION 12 ECOLOGICAL DATA No data available. SECTION 13 DISPOSAL CONSIDERATIONS Dispose of in according to local, state, and federal regulations. SECTION 14 TRANSPORTATION DATA Not a dangerous good. SECTION 15 REGULATORY INFORMATION TSCA: Listed in the TSCA inventory DSCL (EEC): Listed on the DSCL inventory SARA 302/304: Not Listed SARA 311/312: Acute Health Hazard, Chronic Health Hazard SARA (TITLE 313): Not Listed CALIFORNIA PROP. 65: Not Listed WHMIS CANADA: Class D-2B: Toxic material causing other toxic effects. NEW JERSEY RIGHT TO KNOW COMPONENTS: Scandium iodide PENNSYLVANIA RIGHT TO KNOW COMPONENTS: Scandium iodide SCANDIUM IODIDE PAGE 3 PAGE 4 SECTION 16 OTHER INFORMATION DISCLAIMER: The information herein is believed to be accurate and reliable as of the date compiled. However, Prochem, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information in this document or any use of the product based on the information. DATE PREPARED: 08/14 SCANDIUM IODIDE PAGE 4