Yttrium (III) Bromide, Hydrate – ProChem SDS PAGE 1 SECTION 1 PRODUCT AND COMPANY INFORMATION PRODUCT NAME: Yttrium (III) Bromide, Hydrate PRODUCT NUMBER: 3836-1 CAS NUMBER: 13759-89-2 MANUFACTURER: Prochem, Inc. PHONE: 815-398-1788 826 Roosevelt Road TOLL FREE: 800-795-8788 Rockford, IL 61109 IN CASE OF TRANSPORTATION EMERGENCY CONTACT CHEM-TREC: 1-800-424-9300 SECTION 2 HAZARDS IDENTIFICATION CLASSIFICATION OF SUBSTANCE OR MIXTURE Pictogram Signal Word Warning Hazard Statements H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause serious respiratory irritation. Precautionary Phrases P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P264 Wash hands and skin (face) thoroughly after handling P271 Use ONLY outdoors or in a well-ventilated area/under a hood. P280 Wear protective gloves/protective clothing/eyes & face protection P362 Take off contaminated clothing and wash clothing before reuse P302+P352 IF ON SKIN; Wash with plenty of soap and water. P332+P313 If Eye irritation persists: Get medical advice / attention P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P304+P340+P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing and call a POISON CENTER or doctor if you feel unwell. HMIS CLASSIFICATION: Health: 2 Flammability: 0 Reactivity: 0 NFPA RATING: Health: 2 Fire: 0 Reactivity Hazard: 0 YTTRIUM (III) BROMIDE, HYDRATE PAGE 1 PAGE 2 SECTION 2 HAZARDS IDENTIFICATION EYE CONTACT: Causes irritation of the eyes. SKIN CONTACT: Causes irritation. INHALATION: Causes irritation to nose, throat, and respiratory tract. INGESTION: No data available SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS Formula: YBr3.XH2O. Molecular Weight: 328.63 (anhy.) CHEMICAL NAME CAS# % ACGIH (TWA) OSHA (PEL) Yttrium (III) Bromide, Hydrate 13759-89-2 99.999% Not determined Not determined SECTION 4 FIRST AID MEASURES EYE EXPOSURE: Immediately flush the eyes with copious amounts of water (lukewarm if possible). Assure flushing under eyelids. A victim may need assistance in keeping their eyelids open. Get immediate competent medical attention. SKIN EXPOSURE: Wash affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists. INHALATION: Remove victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases, seek immediate medical assistance. Give oxygen if deemed necessary. If not breathing administer CPR. Get emergency care immediately INGESTION: Wash out mouth with water, provided person is conscious. Consult a physician. SECTION 5 FIREFIGHTING MEASURES FLASH POINT: Not applicable AUTO IGNITION TEMPERATURE: Not applicable EXPLOSION LIMITS: Not applicable EXTINGUISHING MEDIUM: Carbon dioxide, extinguishing powder, and water spray. SPECIAL FIRE FIGHTING PROCEDURES: If involved in a fire, fire fighters should be equipped with a NIOSH approved positive self-contained breathing apparatus, flame and chemical resistant clothing, hats, boots, and gloves. HAZARDOUS COMBUSTION AND DECOMPOSITION PRODUCTS: Hydrogen bromide SECTION 6 ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS: Wear approved personal protective equipment. Keep unprotected persons away. Ensure adequate ventilation. ENVIRONMENTAL PRECAUTIONS: Do not let product enter drains or allow to be released into the environment. METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP: Sweep up avoiding raising dust and place in a well-marked container for disposal. SECTION 7 HANDLING AND STORAGE PRECAUTIONS FOR SAFE HANDLING: Wear approved personal protective equipment. Avoid inhalation. Avoid contact with skin, eyes, and clothing. Ensure adequate ventilation CONDITIONS FOR SAFE STORAGE: Store in a tightly sealed container in a dry area. Hygroscopic. Picks up moisture readily from air. Store away from strong oxidizing agents. SECTION 8 EXPOSURE CONTROLS AND PERSONAL PROTECTION EYE PROTECTION: Always wear approved safety glasses with side shields, safety goggles, or face shield when handling a chemical substance in the laboratory. SKIN PROTECTION: Chemical resistant gloves. VENTILATION: Handle in an efficient chemical fume hood. RESPIRATOR: If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 19-10.134. YTTRIUM (III) BROMIDE, HYDRATE PAGE 2 PAGE 3 SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES COLOR AND FORM: Colorless crystal MOLECULAR WEIGHT: 328.63 (anhy.) BOILING POINT: No data available SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES (Cont.) MELTING POINT: 904°C SPECIFIC GRAVITY: No data available VAPOR PRESSURE: No data SOLUBILITY: Soluble SECTION 10 STABILITY AND REACTIVITY STABILITY: Stable HAZARDOUS POLYMERIZATION: Will not occur CONDITIONS TO AVOID: None known INCOMPATIBILITY: Strong oxidizing agents DECOMPOSITION PRODUCTS: Hydrogen bromide gas SECTION 11 TOXICOLOGICAL DATA RTECS DATA: No data CARCINOGENIC EFFECTS: No components of this product present at levels greater than or equal to 0.1% is identified as a confirmed carcinogen by IARC, ACGIH, NTP, and OSHA. MUTAGENIC EFFECTS: Not available TETRATOGENIC EFFECTS: No data available To the best of our knowledge the toxicological effects of this compound have not been fully investigated. SECTION 12 ECOLOGICAL DATA No information available SECTION 13 DISPOSAL CONSIDERATIONS Dispose of in according to local, state, and federal regulations. SECTION 14 TRANSPORTATION DATA Non-hazardous material SECTION 15 REGULATORY INFORMATION TSCA: Listed in the TSCA inventory SARA 313 COMPONENTS: No components subject to Section 313 reporting. CALIFORNIA PROP. 65 COMPONENTS: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm. YTTRIUM (III) BROMIDE, HYDRATE PAGE 3 PAGE 4 SECTION 16 OTHER INFORMATION DISCLAIMER: The information herein is believed to be accurate and reliable as of the date compiled. However, Prochem, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information in this document or any use of the product based on the information. DATE PREPARED: 04/15 DATE REVISED: 08/26 REVISED SUMMARY: Removed company fax number. Updated Section 2. All other details in this document about this product remained unchanged. Revisions by EHS on 08/19/26 EHS/SDS DEPT. YTTRIUM (III) BROMIDE, HYDRATE PAGE 4