Dysprosium (III) Oxalate Hydrate – ProChem SDS PAGE 1 SECTION 1 PRODUCT AND COMPANY INFORMATION PRODUCT NAME: Dysprosium (III) Oxalate Hydrate PRODUCT NUMBER: 1657 CAS NUMBER: 58176-69-5 MANUFACTURER: Prochem, Inc. PHONE: 815-398-1788 826 Roosevelt Road FAX: 815-398-1810 Rockford, IL 61109 TOLL FREE: 800-795-8788 IN CASE OF TRANSPORTATION EMERGENCY CONTACT CHEM-TREC: 1-800-424-9300 SECTION 2 HAZARDS IDENTIFICATION CLASSIFICATION OF SUBSTANCE OR MIXTURE Pictogram Signal Word Warning Hazard Statements H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. Precautionary Phrases P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P362 Take off contaminated clothing and wash before reuse. HMIS CLASSIFICATION: Health: 0 Fire: 0 Reactivity Hazard: 0 NFPA RATING: Health: 0 Flammability: 0 Reactivity Hazard: 0 DYSPROSIUM (III) OXALATE HYDRATE PAGE 1 PAGE 2 SECTION 2 HAZARDS IDENTIFICATION (Cont.) EYE CONTACT: Causes irritation to the eyes. SKIN CONTACT: Causes irritation to the skin. INHALATION: Dust if irritation to the nose, mucous membranes, and respiratory tract. INGESTION: No data found. SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS Formula: Dy2(C2O4)3Ÿ XH2O Molecular Weight: 589.05 (anhy.) CHEMICAL NAME CAS# % Dysprosium (III) Oxalate Hydrate 58176-69-5 100 SECTION 4 FIRST AID MEASURES EYE EXPOSURE: Immediately flush the eyes with copious amounts of water for at least 15 minutes. Assure flushing under eyelids. A victim may need assistance in keeping their eyelids open. Get immediate competent medical attention. SKIN EXPOSURE: Wash affected area with plenty of water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists. INHALATION: Remove to fresh air and keep at rest. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases, seek immediate medical assistance. INGESTION: Seek medical assistance immediately. Keep the victim calm. SECTION 5 FIREFIGHTING MEASURES FLASH POINT: Not applicable AUTO IGNITION TEMPERATURE: Not available EXPLOSION LIMITS: Product does not present explosion hazards. EXTINGUISHING MEDIUM: Water spray, carbon dioxide, dry powder, or foam. SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained, approved breathing apparatus and full protective clothing, including eye protection and boots. HAZARDOUS COMBUSTION AND DECOMPOSITION PRODUCTS: Carbon oxides and dysprosium oxide SECTION 6 ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS: Wear all appropriate equipment when using this material. Ensure adequate ventilation. Avoid dust formation. Avoid breathing dust. ENVIRONMENTAL PRECAUTIONS: Prevent spillage from entering drains or allowing to be released into the environment. METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP: Sweep up and place in suitable container for proper disposal. SECTION 7 HANDLING AND STORAGE PRECAUTIONS FOR SAFE HANDLING: Wear appropriate personal protective equipment. Ensure adequate ventilation. Avoid contact with skin and eyes. Avoid dust formation. CONDITIONS FOR SAFE STORAGE: Store in cool, dry, and well-ventilated area. SECTION 8 EXPOSURE CONTROLS AND PERSONAL PROTECTION EXPOSURE CONTROLS: Contains no substance with occupational exposure limit values. EYE PROTECTION: Wear chemical safety glasses or goggles and face shield. SKIN PROTECTION: Wear nitrile or rubber gloves, and a complete suit protecting against chemicals. VENTILATION: Provide local exhaust, preferably mechanical. RESPIRATOR: Use an approved respirator. DYSPROSIUM (III) OXALATE HYDRATE PAGE 2 PAGE 3 SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES COLOR AND FORM: White solid ODOR: None MOLECULAR WEIGHT: 589.05 (anhy.) BOILING POINT: No data available MELTING POINT: 40° C SPECIFIC GRAVITY: No data available SOLUBILITY: Insoluble SECTION 10 STABILITY AND REACTIVITY STABILITY: Stable HAZARDOUS POLYMERIZATION: Will not occur CONDITIONS TO AVOID: Water, moisture, and humidity. INCOMPATIBILITY: Strong oxidizing agents. DECOMPOSITION PRODUCTS: Carbon oxides and dysprosium oxide SECTION 11 TOXICOLOGICAL DATA ACUTE TOXICITY: Not available CARCINOGENIC EFFECTS: No component of this product present at levels greater than or equal to 0.1% is considered to be a human carcinogen. MUTAGENIC EFFECTS: Not available TETRATOGENIC EFFECTS: Not available CHRONIC TOXICITY: Not available RTECS: No data To the best of our knowledge the toxicological effects of this compound have not been fully investigated. SECTION 12 ECOLOGICAL DATA No information available SECTION 13 DISPOSAL CONSIDERATIONS Dispose of in according to local, state, and federal regulations. SECTION 14 TRANSPORTATION DATA Not a dangerous good SECTION 15 REGULATORY INFORMATION TSCA: No data SARA (TITLE 313): Not listed PENNSYLVANIA RIGHT TO KNOW: Dysprosium (III) Oxalate Hydrate NEW JERSEY RIGHT TO KNOW: Dysprosium (III) Oxalate Hydrate CALIFORNIA PROP. 65: Not Listed DYSPROSIUM (III) OXALATE HYDRATE PAGE 3 PAGE 4 SECTION 16 OTHER INFORMATION DISCLAIMER: The information herein is believed to be accurate and reliable as of the date compiled. However, Prochem, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information in this document or any use of the product based on the information. DATE PREPARED: 05/15 SDS DEPT. DYSPROSIUM (III) OXALATE HYDRATE PAGE 4