Ytterbium (III) chloride, anhydrous – ProChem SDS PAGE 1 SECTION 1 PRODUCT AND COMPANY INFORMATION PRODUCT NAME: Ytterbium (III) chloride, anhydrous PRODUCT NUMBER: 3796 CAS NUMBER: 10361-91-8 SYNONYMS: Ytterbium trichloride MANUFACTURER: Prochem, Inc. PHONE: 815-398-1788 826 Roosevelt Road FAX: 815-398-1810 Rockford, IL 61109 TOLL FREE: 800-795-8788 IN CASE OF TRANSPORTATION EMERGENCY CONTACT CHEM-TREC: 1-800-424-9300 SECTION 2 HAZARDS IDENTIFICATION CLASSIFICATION OF SUBSTANCE OR MIXTURE Not a dangerous substance according to the GHS HMIS CLASSIFICATION: Health: 0 Flammability: 0 Reactivity: 0 NFPA RATING: Health: 0 Fire: 0 Reactivity Hazard: 0 EYE CONTACT: May be a mild irritant to the eyes. SKIN CONTACT: May cause slight irritation of the skin. INHALATION: Inhalation of dust can lead to irritation of the respiratory tract. INGESTION: May be harmful if swallowed. SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS Formula: YbCl3 Molecular Weight: 279.4 CHEMICAL NAME CAS# % ACGIH (TWA) OSHA (PEL) Ytterbium (III) chloride, anhydrous 10361-91-8 100 No data No data SECTION 4 FIRST AID MEASURES EYE EXPOSURE: Immediately flush the eyes with copious amounts of water for at least 15 minutes. Assure flushing under eyelids. A victim may need assistance in keeping their eyelids open. Get immediate competent medical attention. SKIN EXPOSURE: Wash affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists. YTTERBIUM (III) CHLORIDE, ANHYDROUS PAGE 1 PAGE 2 INHALATION: Remove victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases, seek immediate medical assistance. INGESTION: Seek medical assistance immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel. SECTION 5 FIREFIGHTING MEASURES FLASH POINT: Not applicable AUTO IGNITION TEMPERATURE: Not applicable EXPLOSION LIMITS: Not applicable EXTINGUISHING MEDIUM: Use water spray, dry chemical, carbon dioxide, or chemical foam. SPECIAL FIRE FIGHTING PROCEDURES: If involved in a fire, fire fighters should be equipped with a NIOSH approved positive self-contained breathing apparatus, flame and chemical resistant clothing, hats, boots, and gloves. HAZARDOUS COMBUSTION AND DECOMPOSITION PRODUCTS: Hydrogen chloride gas and ytterbium oxides SECTION 6 ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS: Wear approved personal protective equipment. Avoid dust formation. Avoid breathing dust, vapors, mist or gas. Ensure adequate ventilation. ENVIRONMENTAL PRECAUTIONS: Do not let product enter drains or allowed to be released to the environment. METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP: Small spills can be mixed with vermiculite or sodium carbonate and swept up. SECTION 7 HANDLING AND STORAGE PRECAUTIONS FOR SAFE HANDLING: Wear approved personal protective equipment. Avoid contact with skin and eyes. Avoid formation of dust. Ensure adequate ventilation CONDITIONS FOR SAFE STORAGE: Store material in a tightly sealed container away from moisture in a cool and dry area. Store under inert atmosphere. Material is hygroscopic. SECTION 8 EXPOSURE CONTROLS AND PERSONAL PROTECTION EYE PROTECTION: Always wear approved safety glasses with side shields, safety goggles, or face shield when handling a chemical substance in the laboratory. SKIN PROTECTION: Chemical resistant gloves. VENTILATION: Handle in an efficient chemical fume hood. RESPIRATOR: If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 19-10.134. SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES COLOR AND FORM: White powder MOLECULAR WEIGHT: 279.4 BOILING POINT: 1900° C MELTING POINT: 703° C SPECIFIC GRAVITY: 4.06 gm/ml VAPOR PRESSURE: No data SOLUBILITY: Soluble SECTION 10 STABILITY AND REACTIVITY STABILITY: Hygroscopic HAZARDOUS POLYMERIZATION: No hazardous polymerization CONDITIONS TO AVOID: Moisture and incompatible materials INCOMPATIBILITY: Active metals DECOMPOSITION PRODUCTS: Hydrogen chloride and ytterbium oxides YTTERBIUM (III) CHLORIDE, ANHYDROUS PAGE 2 PAGE 3 SECTION 11 TOXICOLOGICAL DATA ACUTE TOXICITY: Administration onto the skin (rabbit); Standard Draize test: 500 mg/24H. Administration into the eye (rabbit); Standard Draize test: 50 mg. Oral (mouse); LD50: 4836 mg/kg. Intraperitoneal (mouse); LD50: 300 mg/kg. Intraperitoneal (guinea pig); LD50: 132 mg/kg. Intravenous (hamster); TDLo: 50 mg/kg. Intravenous (hamster); TDLo: 75 mg/kg. Intravenous (hamster); TDLo: 100 mg/kg. CARCINOGENIC EFFECTS: No components of this product present at levels greater than or equal to 0.1% is identified as a confirmed carcinogen by IARC, ACGIH, NTP, and OSHA. MUTAGENIC EFFECTS: Not available TETRATOGENIC EFFECTS: No data available RTECS: ZG2100000 To the best of our knowledge the toxicological effects of this compound have not been fully investigated. SECTION 12 ECOLOGICAL DATA No information available SECTION 13 DISPOSAL CONSIDERATIONS Dispose of in according to local, state, and federal regulations. SECTION 14 TRANSPORTATION DATA Non-hazardous material SECTION 15 REGULATORY INFORMATION TSCA: Listed in the TSCA inventory SARA 313 COMPONENTS: This material does not contain any chemical components with know CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. SARA 302 COMPONENTS: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. SARA 311/312 HAZARDS: Acute Health Hazard MASSACHUSETTS RIGHT TO KNOW COMPONENTS: No components are subject to the Massachusetts Right To Know Act. PENNSYLVANIA RIGHT TO KNOW COMPONENTS: Ytterbium (III) trichloride NEW JERSEY RIGHT TO KNOW COMPONENTS: Ytterbium (III) trichloride CALIFORNIA PROP. 65 COMPONENTS: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm. SECTION 16 OTHER INFORMATION DISCLAIMER: The information herein is believed to be accurate and reliable as of the date compiled. However, Prochem, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information in this document or any use of the product based on the information. DATE PREPARED: 05/14 YTTERBIUM (III) CHLORIDE, ANHYDROUS PAGE 3