Scandium(III) bis(trifluoromethylsulfonyl)imide SDS – Avocado Research Chemicals Ltd. (Part of Thermo Fisher Scientific) PAGE 1 Page 1 / 8 SAFETY DATA SHEET Revision Date 31-Jul-2026 Version 6 ALFAA46948 Scandium(III) bis(trifluoromethylsulfonyl)imide SECTION 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 产品说明:产品说明:产品说明:产品说明: 双(三氟甲基磺酰基)酰亚胺钪(III)双(三氟甲基磺酰基)酰亚胺钪(III)双(三氟甲基磺酰基)酰亚胺钪(III)双(三氟甲基磺酰基)酰亚胺钪(III) Product Description: Scandium(III) bis(trifluoromethylsulfonyl)imide Cat No. : 46948 CAS No 176726-07-1 Molecular Formula C6 F18 S6 O12 N3 Sc Supplier Avocado Research Chemicals Ltd. (Part of Thermo Fisher Scientific) Shore Road, Heysham Lancashire, LA3 2XY, United Kingdom Office Tel: +44 (0) 1524 850506 Office Fax: +44 (0) 1524 850608 Emergency Telephone Number For information US call: 001-800-227-6701 / Europe call: +32 14 57 52 11 Emergency Number US:001-201-796-7100 / Europe: +32 14 57 52 99 CHEMTREC Tel. No. US:001-800-424-9300 / Europe:001-703-527-3887 E-mail address begel.sdsdesk@thermofisher.com Recommended Use Laboratory chemicals. Uses advised against No Information available SECTION 2. HAZARD IDENTIFICATION Physical State Appearance Odor Solid White - Light yellow No information available Emergency Overview Causes severe skin burns and eye damage. Moisture sensitive. Classification of the substance or mixture Skin Corrosion/Irritation Category 1 B Serious Eye Damage/Eye Irritation Category 1 Label Elements Signal Word Danger Hazard Statements H314 - Causes severe skin burns and eye damage ______________________________________________________________________________________________ Page 1 PAGE 2 ALFAA46948 SAFETY DATA SHEET Revision Date 31-Jul-2026Page 2 / 8 Scandium(III) bis(trifluoromethylsulfonyl)imide ______________________________________________________________________________________________ Precautionary Statements Prevention P264 - Wash face, hands and any exposed skin thoroughly after handling P271 - Use only outdoors or in a well-ventilated area P280 - Wear protective gloves/protective clothing/eye protection/face protection Response P301 + P330 + P331 - IF SWALLOWED: rinse mouth. Do NOT induce vomiting P303 + P361 + P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P310 - Immediately call a POISON CENTER or doctor P362 + P364 - Take off contaminated clothing and wash it before reuse Storage P403 + P233 - Store in a well-ventilated place. Keep container tightly closed Disposal P501 - Dispose of contents/ container to an approved waste disposal plant Physical and Chemical Hazards None identified. Health Hazards Corrosive. Causes skin and eye burns. Environmental hazards Contains no substances known to be hazardous to the environment or not degradable in waste water treatment plants. This product does not contain any known or suspected endocrine disruptors. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Component CAS No Weight % Scandium(III) bis(trifluoromethylsulfonyl)imide 176726-07-1 <=100 SECTION 4. FIRST AID MEASURES General Advice Show this safety data sheet to the doctor in attendance. Immediate medical attention is required. Eye Contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required. Keep eye wide open while rinsing. Skin Contact Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Call a physician immediately. Inhalation Remove to fresh air. If not breathing, give artificial respiration. Call a physician or poison control center immediately. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Ingestion Immediate medical attention is required. Do NOT induce vomiting. Drink plenty of water. Never give anything by mouth to an unconscious person. Most important symptoms and effects Causes burns by all exposure routes. Product is a corrosive material. Use of gastric lavage or emesis is contraindicated. Possible perforation of stomach or esophagus should be investigated: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation ______________________________________________________________________________________________ Page 2 PAGE 3 ALFAA46948 SAFETY DATA SHEET Revision Date 31-Jul-2026Page 3 / 8 Scandium(III) bis(trifluoromethylsulfonyl)imide ______________________________________________________________________________________________ Self-Protection of the First Aider Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Notes to Physician Treat symptomatically. SECTION 5. FIRE-FIGHTING MEASURES Suitable Extinguishing Media CO 2, dry chemical, dry sand, alcohol-resistant foam. Extinguishing media which must not be used for safety reasons No information available. Specific Hazards Arising from the Chemical The product causes burns of eyes, skin and mucous membranes. Protective Equipment and Precautions for Firefighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Thermal decomposition can lead to release of irritating gases and vapors. SECTION 6. ACCIDENTAL RELEASE MEASURES Personal Precautions Use personal protective equipment as required. Evacuate personnel to safe areas. Avoid contact with skin, eyes or clothing. Environmental Precautions Should not be released into the environment. Do not allow material to contaminate ground water system. See Section 12 for additional Ecological Information. Do not flush into surface water or sanitary sewer system. Methods for Containment and Clean Up Sweep up and shovel into suitable containers for disposal. Avoid dust formation. Refer to protective measures listed in Sections 8 and 13. SECTION 7. HANDLING AND STORAGE Handling Wear personal protective equipment/face protection. Do not get in eyes, on skin, or on clothing. Use only under a chemical fume hood. Do not breathe dust. Do not ingest. If swallowed then seek immediate medical assistance. Storage Corrosives area. Keep containers tightly closed in a dry, cool and well-ventilated place. Specific Use(s) Use in laboratories SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control Parameters Monitoring methods BS EN 14042:2003 Title Identifier: Workplace atmospheres. Guide for the application and use of procedures for the assessment of ______________________________________________________________________________________________ Page 3 PAGE 4 ALFAA46948 SAFETY DATA SHEET Revision Date 31-Jul-2026Page 4 / 8 Scandium(III) bis(trifluoromethylsulfonyl)imide ______________________________________________________________________________________________ exposure to chemical and biological agents. MDHS14/3 General methods for sampling and gravimetric analysis of respirable and inhalable dust MDHS 91 Metals and metalloids in workplace air by X-ray fluorescence spectrometry MDHS 99 Metals in air by ICP-AES Exposure Controls Engineering Measures Ensure that eyewash stations and safety showers are close to the workstation location. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source. Personal protective equipment Eye Protection Goggles (European standard - EN 166) Hand Protection Protective gloves Glove material Breakthrough time Glove thickness EU standard Glove comments Nitrile rubber See manufacturers - EN 374 (minimum requirement) Neoprene recommendations Natural rubber PVC Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information) Ensure gloves are suitable for the task: Chemical compatability, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination. Skin and body protection Long sleeved clothing Respiratory Protection When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly Large scale/emergency use Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced Recommended Filter type: Particulates filter conforming to EN 143 Small scale/Laboratory use Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended half mask:- Particle filtering: EN149:2001 When RPE is used a face piece Fit Test should be conducted Hygiene Measures Handle in accordance with good industrial hygiene and safety practice. Environmental exposure controls No information available. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance White - Light yellow Physical State Solid Odor No information available Odor Threshold No data available pH No information available Melting Point/Range 199 - 204 °C / 390.2 - 399.2 °F Softening Point No data available Boiling Point/Range No information available Flash Point No information available Method - No information available ______________________________________________________________________________________________ Page 4 PAGE 5 ALFAA46948 SAFETY DATA SHEET Revision Date 31-Jul-2026Page 5 / 8 Scandium(III) bis(trifluoromethylsulfonyl)imide ______________________________________________________________________________________________ Evaporation Rate Not applicable Solid Flammability (solid,gas) No information available Explosion Limits No data available Vapor Pressure No data available Vapor Density Not applicable Solid Specific Gravity / Density No data available Bulk Density No data available Water Solubility No information available Solubility in other solvents No information available Partition Coefficient (n-octanol/water) Autoignition Temperature No data available Decomposition Temperature No data available Viscosity Not applicable Solid Explosive Properties No information available Oxidizing Properties No information available Molecular Formula C6 F18 S6 O12 N3 Sc Molecular Weight 885.37 SECTION 10. STABILITY AND REACTIVITY Stability Moisture sensitive. Hazardous Reactions None under normal processing. Hazardous Polymerization No information available. Conditions to Avoid None known. Materials to avoid No information available. Hazardous Decomposition Products Carbon monoxide (CO). Carbon dioxide (CO2). Nitrogen oxides (NOx). Sulfur oxides. Hydrogen fluoride. Metal oxides. SECTION 11. TOXICOLOGICAL INFORMATION Product Information (a) acute toxicity; (b) skin corrosion/irritation; Category 1 B (c) serious eye damage/irritation; Category 1 (d) respiratory or skin sensitization; Respiratory No data available Skin No data available (e) germ cell mutagenicity; No data available (f) carcinogenicity; No data available There are no known carcinogenic chemicals in this product (g) reproductive toxicity; No data available ______________________________________________________________________________________________ Page 5 PAGE 6 ALFAA46948 SAFETY DATA SHEET Revision Date 31-Jul-2026Page 6 / 8 Scandium(III) bis(trifluoromethylsulfonyl)imide ______________________________________________________________________________________________ (h) STOT-single exposure; No data available (i) STOT-repeated exposure; No data available Target Organs No information available. (j) aspiration hazard; Not applicable Solid Symptoms / effects,both acute and Product is a corrosive material. Use of gastric lavage or emesis is contraindicated. delayed Possible perforation of stomach or esophagus should be investigated: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation SECTION 12. ECOLOGICAL INFORMATION Ecotoxicity effects May cause long-term adverse effects in the environment. Do not allow material to contaminate ground water system. Persistence and Degradability Product contains heavy metals. Discharge into the environment must be avoided. Special pre-treatment is necessary Persistence May persist. Degradation in sewage Contains substances known to be hazardous to the environment or not degradable in waste treatment plant water treatment plants. Bioaccumulative Potential Product has a high potential to bioconcentrate Mobility in soil No information available Endocrine Disruptor Information This product does not contain any known or suspected endocrine disruptors Persistent Organic Pollutant This product does not contain any known or suspected substance Ozone Depletion Potential This product does not contain any known or suspected substance SECTION 13. DISPOSAL CONSIDERATIONS Waste from Residues/Unused Waste is classified as hazardous. Dispose of in accordance with the European Directives Products on waste and hazardous waste. Dispose of in accordance with local regulations. Contaminated Packaging Dispose of this container to hazardous or special waste collection point. Other Information Waste codes should be assigned by the user based on the application for which the product was used. Do not empty into drains. Do not flush to sewer. Large amounts will affect pH and harm aquatic organisms. SECTION 14. TRANSPORT INFORMATION Road and Rail Transport UN-No UN1759 Proper Shipping Name Corrosive solid, n.o.s. Technical Shipping Name (Scandium(III) bis(trifluoromethylsulfonyl)imide) Hazard Class 8 ______________________________________________________________________________________________ Page 6 PAGE 7 ALFAA46948 SAFETY DATA SHEET Revision Date 31-Jul-2026Page 7 / 8 Scandium(III) bis(trifluoromethylsulfonyl)imide ______________________________________________________________________________________________ Packing Group II IMDG/IMO UN-No UN1759 Proper Shipping Name CORROSIVE SOLID, N.O.S.* Technical Shipping Name (Scandium(III) bis(trifluoromethylsulfonyl)imide) Hazard Class 8 Packing Group II IATA UN-No UN1759 Proper Shipping Name CORROSIVE SOLID, N.O.S* Technical Shipping Name (Scandium(III) bis(trifluoromethylsulfonyl)imide) Hazard Class 8 Packing Group II Special Precautions for User No special precautions required SECTION 15. REGULATORY INFORMATION Measures on the Environmental Administration of New Chemical Substances Registration Registration/Notification number B1A222250466 Downstream users need to comply with the conditions of safe use of the chemical, understand the environmental and health hazard and risk management measures identified on the SDS as well as the local/national regulations concerning the chemical. International Inventories X = listed, China (IECSC), Europe (EINECS/ELINCS/NLP), U.S.A. (TSCA), Canada (DSL/NDSL), Philippines (PICCS), Japan (ENCS), Japan (ISHL), Australia (AICS), Korea (KECL). National Regulations SECTION 16. OTHER INFORMATION Prepared By Health, Safety and Environmental Department Revision Date 31-Jul-2026 Revision Summary Not applicable. Training Advice Chemical hazard awareness training, incorporating labelling, Safety Data Sheets (SDS), Personal Protective Equipment (PPE) and hygiene. Use of personal protective equipment, covering appropriate selection, compatibility, breakthrough thresholds, care, maintenance, fit and standards. First aid for chemical exposure, including the use of eye wash and safety showers. Legend CAS - Chemical Abstracts Service TSCA - United States Toxic Substances Control Act Section 8(b) Inventory EINECS/ELINCS - European Inventory of Existing Commercial Chemical DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances/EU List of Notified Chemical Substances Substances List PICCS - Philippines Inventory of Chemicals and Chemical Substances ENCS - Japanese Existing and New Chemical Substances IECSC - Chinese Inventory of Existing Chemical Substances AICS - Australian Inventory of Chemical Substances ______________________________________________________________________________________________ Page 7 PAGE 8 ALFAA46948 SAFETY DATA SHEET Revision Date 31-Jul-2026Page 8 / 8 Scandium(III) bis(trifluoromethylsulfonyl)imide ______________________________________________________________________________________________ KECL - Korean Existing and Evaluated Chemical Substances NZIoC - New Zealand Inventory of Chemicals WEL - Workplace Exposure Limit TWA - Time Weighted Average ACGIH - American Conference of Governmental Industrial Hygienists IARC - International Agency for Research on Cancer DNEL - Derived No Effect Level PNEC - Predicted No Effect Concentration RPE - Respiratory Protective Equipment LD50 - Lethal Dose 50% LC50 - Lethal Concentration 50% EC50 - Effective Concentration 50% NOEC - No Observed Effect Concentration POW - Partition coefficient Octanol:Water PBT - Persistent, Bioaccumulative, Toxic vPvB - very Persistent, very Bioaccumulative ICAO/IATA - International Civil Aviation Organization/International Air IMO/IMDG - International Maritime Organization/International Maritime Transport Association Dangerous Goods Code ADR - European Agreement Concerning the International Carriage of MARPOL - International Convention for the Prevention of Pollution from Dangerous Goods by Road Ships OECD - Organisation for Economic Co-operation and Development ATE - Acute Toxicity Estimate BCF - Bioconcentration factor VOC - (Volatile Organic Compound) Key literature references and sources for data https://echa.europa.eu/information-on-chemicals Suppliers safety data sheet, Chemadvisor - LOLI, Merck index, RTECS Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text End of Safety Data Sheet ______________________________________________________________________________________________ Page 8