# Terbium \(Tb\) Metal — Safety Data Sheet \(SDS\)

原本PDFから抽出したテキストです。表、画像、記号、OCR結果は原本と異なる場合があります。安全情報は原本PDFで確認してください。

- **文書名:** Terbium \(Tb\) Metal — Safety Data Sheet \(SDS\)
- **発行元:** Ames Laboratory, US DOE — Materials Preparation Center
- **材料:** Terbium metal
- **CAS番号:** 7440\-27\-9
- **製品番号・グレード:** pieces, ingot, rod, foil, sheet, target
- **文書種類:** SDS
- **原文の言語:** English
- **地域:** United States · OSHA HCS 29 CFR 1910\.1200
- **改訂日:** January 26, 2016
- **ページ数:** 3
- **原本ファイル名:** terbium\-metal\-sds\-ames\-laboratory\.pdf
- **RESDSページ:** https://resds\.com/document/terbium\-tb\-metal\-sds\-en\-3a10a9752b
- **原本PDF:** https://resds\.com/pdf/terbium\-tb\-metal\-sds\-en\-3a10a9752b\.pdf
- **情報源URL:** https://www\.ameslab\.gov/sites/default/files/inline\-files/65\_Terbium\_SDS\.pdf
- **説明:** Terbium \(Tb\) elemental rare earth metal SDS, CAS 7440\-27\-9, published by Ames Laboratory\. Original supplier PDF for the stated solid forms; revision January 26, 2016\.

## ページ 1

```text
SDS
Safety Data Sheet
per 29 CFR 1910.1200                                                        Page 1 of 3
Terbium

SAFETY DATA SHEET


1 PRODUCT AND SUPPLIER IDENTIFICATION
Product Name:  Terbium - pieces, ingot, rod, foil, sheet, target
Formula:       Tb

Supplier:       Ames Laboratory, US DOE
                    Materials Preparation Center
                121 Metals Development
                Ames, IA 50010 USA
Telephone:      515-294-5236
Fax:            515-294-8727
Email:         mpc@ameslab.gov
Emergency:     515-294-3483 (24 hour)
Recommended Uses:  Scientific Research


2 HAZARDS IDENTIFICATION
GHS Classification (29 CFR 1910.1200):  Not classified as hazardous
GHS Label Elements:
Signal Word: N/A
Hazard Statements: N/A
Precautionary Statements:  N/A


3 COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient:     Terbium
CAS#:           7440-27-9
%:             100
EC#:            231-137-6


4  FIRST AID MEASURES
General Measures: Under normal handling and use, exposure to solid forms of this material present few health hazards.
Subsequent operations such as grinding, melting or welding may create dusts or fumes which could be inhaled or contact skin
or eyes.
INHALATION: Remove to fresh air, keep warm and quiet, give oxygen if breathing is difficult. Seek medical attention.
INGESTION: Rinse mouth with water. Do not induce vomiting. Seek medical attention. Never induce vomiting or give
anything by mouth to an unconscious person.
SKIN: Remove contaminated clothing, brush material off skin, wash affected area with soap and water. Seek medical
attention if symptoms persist.
EYES: Flush eyes with lukewarm water, including under upper and lower eyelids, for at least 15 minutes. Seek medical
attention if symptoms persist.

Most Important Symptoms/Effects, Acute and Delayed: See section 11 for more information.
Indication of Immediate Medical Attention and Special Treatment: No other relevant information available.


5 FIREFIGHTING MEASURES
Extinguishing Media: Use Class D dry powder extinguishing agent.
Unsuitable Extinguishing Media: Do not use water.
Specific Hazards Arising from the Material: Flammable in the form of dust when exposed to heat, sparks or flame. May
react with water under fire conditions to liberate flammable hydrogen gas. May emit fumes of terbium oxide under fire
conditions.
Special Protective Equipment and Precautions for Firefighters: Full face, self-contained breathing apparatus and full




Ames Laboratory is operated for the U.S. DOE by Iowa State University, DE-AC02-07CH11358            Page 1 of 3
```

## ページ 2

```text
SDS
Safety Data Sheet
per 29 CFR 1910.1200                                                        Page 2 of 3

protective clothing to prevent contact with skin and eyes.


6 ACCIDENTAL RELEASE MEASURES
Personal Precautions, Protective Equipment, and Emergency Procedures: Wear appropriate respiratory and protective
equipment specified in section 8. Isolate spill area. Avoid dust formation. Avoid contact with skin and eyes. Avoid breathing
dust or fume. Eliminate all sources of ignition.
Methods and Materials for Containment and Cleaning Up: Sweep or scoop spilled product and place in a closed
container for further handling and disposal. Use only non-sparking tools.
Environmental Precautions: Do not allow to enter drains or to be released to the environment.


7 HANDLING AND STORAGE
Precautions for Safe Handling: Handle in an enclosed, controlled process, under dry protective gas such as argon when
possible. Air and moisture sensitive. Protect from sources of ignition. Protect from water/moisture. Avoid contact with skin
and eyes. Wash thoroughly before eating or smoking. See section 8 for information on personal protection equipment.
Conditions for Safe Storage, Including Any Incompatibilities: Terbium metal should be stored in tightly-closed
containers under argon or mineral oil. Store in a cool, dry area. Protect from moisture. See section 10 for more information
on incompatible materials.


8 EXPOSURE CONTROLS AND PERSONAL PROTECTION
Exposure Limits:   Terbium
OSHA/PEL:       No exposure limit established
ACGIH/TLV:       No exposure limit established
Appropriate Engineering Controls: Handle in a humidity controlled atmosphere. Handle in an enclosed, controlled process
when possible. Ensure adequate ventilation to maintain exposures below occupational limits. Whenever possible the use of
local exhaust ventilation or other engineering controls is the preferred method of controlling exposure to airborne dust and
fume to meet established occupational exposure limits. Use good housekeeping and sanitation practices. Do not use tobacco
or food in work area. Wash thoroughly before eating or smoking. Do not blow dust off clothing or skin with compressed air.
Individual Protection Measures, Such as Personal Protective Equipment:
Respiratory Protection: If permissible levels are exceeded, use NIOSH approved dust respirator.
Eye Protection: Safety glasses
Skin Protection: Wear impermeable gloves, protective work clothing as necessary.


9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Form:              Solid in various forms
Color:              Silver gray metallic
Odor:            Not determined
Odor Threshold  : Not determined
pH:                          N/A
Melting Point:                1356 oC
Boiling Point:                 3230 oC
Flash Point:                  N/A
Evaporation Rate:            N/A
Flammability:               No data
Upper Flammable Limit:       No data
Lower Flammable Limit:       No data
Vapor Pressure:              No data
Vapor Density:                N/A
Relative Density (Specific Gravity):   8.230 g/cc
Solubility in H2O:                 Insoluble
Partition Coefficient (n-octanol/water):  Not determined
Autoignition Temperature:     No data
Decomposition Temperature:   No data
Viscosity:                     N/A


10  STABILITY AND REACTIVITY




Ames Laboratory is operated for the U.S. DOE by Iowa State University, DE-AC02-07CH11358            Page 2 of 3
```

## ページ 3

```text
SDS
Safety Data Sheet
per 29 CFR 1910.1200                                                        Page 3 of 3

Reactivity: No data
Chemical Stability: Stable under recommended storage conditions.
Possibility of Hazardous Reactions: Flammable in the form of dust when exposed to heat, sparks or flame. May react with
water under fire conditions to liberate flammable hydrogen gas. Contact with acids may evolve hydrogen gas.
Conditions to Avoid: Heat, sparks, flame. Dusting conditions.
Incompatible Materials: Acids, acid chlorides, oxidizing agents, halogens, water/moisture, air.
Hazardous Decomposition Products: Terbium oxides, terbium hydroxides, hydrogen.


11 TOXICOLOGICAL INFORMATION
Likely Routes of Exposure: Inhalation, skin, eyes. Product as shipped does not present an inhalation hazard; however
subsequent operations may create dusts or fumes which could be inhaled.
Symptoms of Exposure: May cause irritation.
Acute and Chronic Effects: No data
Acute Toxicity: No data
Carcinogenicity: NTP: Not identified as carcinogenic  IARC: Not identified as carcinogenic
To the best of our knowledge the chemical, physical and toxicological characteristics of the substance are not fully known.


12 ECOLOGICAL INFORMATION
Ecotoxicity: No data
Persistence and Degradability: No data
Bioaccumulative Potential: No data
Mobility in Soil: No data
Other Adverse Effects: Do not allow material to be released to the environment. No further relevant information available.


13 DISPOSAL CONSIDERATIONS
Waste Disposal Method:
Product: Dispose of in accordance with Federal, State and Local regulations.
Packaging: Dispose of in accordance with Federal, State and Local regulations.


14 TRANSPORT INFORMATION
DOT/ADR/IATA/IMDG Regulations: Not regulated
UN Number:               N/A
UN Proper Shipping Name:  N/A
Transport Hazard Class:    N/A
Packing Group:            N/A
Marine Pollutant: No
Special Precautions: N/A

15 REGULATORY INFORMATION
TSCA Listed: All components are listed.
Regulation (EC) No 1272/2008 (CLP): N/A
Canada WHMIS Classification (CPR, SOR/88-66): N/A
HMIS Ratings: Health: 0   Flammability: 1  Physical: 1
NFPA Ratings: Health: 1   Flammability: 1  Reactivity: 1
Chemical Safety Assessment: A chemical safety assessment has not been carried out.

16 OTHER INFORMATION
The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. The
Materials Preparation Center, Ames Laboratory, and Iowa State University, shall not be held liable for any damages resulting
from handling or from contact with the above product and make no warranties, expressed or implied, including, but not
limited to, any implied warranty of merchantability or fitness for a particular purpose or course of performance or usage of
trade.

Prepared by:        The Materials Preparation Center at Ames Laboratory
Revised/Reviewed:   January 26, 2016





Ames Laboratory is operated for the U.S. DOE by Iowa State University, DE-AC02-07CH11358            Page 3 of 3
```
