RESDS希土類SDSライブラリ
English
01 / 安全データシート

HIMO-1 high-purity molybdenum certified reference material containing certified trace scandium SDS

RESDSが収集し、発行元の原本PDFをそのまま保持しています。 HIMO-1 high-purity molybdenum CRM for elemental-impurity analysis. SDS Section 3 identifies molybdenum at 100% (CAS 7439-98-7); no scandium CAS or concentration is asserted from the SDS. The official NRC product record certifies scandium at 28 µg/kg with expanded uncertainty 28 µg/kg. 改訂版 2025年7月31日, version 1.0. 情報源: National Research Council Canada. Licensed under the 開く Government Licence – Canada.

02 / ORIGINAL PDF

PDFプレビュー

無料で閲覧・ダウンロード可能・登録やログインは不要です。

PDFを読み込み中…

First page preview
03 / RESDS DATA ANALYSIS

Normalized SDS data & document analysis

RESDS derives the results below from this document’s extracted text and the site’s same-material index. Detected codes are not reclassified. “Not detected” does not mean “not present”; confirm the original PDF for safety-critical use.

SDS sections15/16
Coverage94%
Hazard codes0
Precautionary codes0
UN numbers0
Same-material docs1

SDS 16-section coverage

15 section headings detected; 1 not detected by the parser.

1. Identification · detected2. Hazard identification · not detected3. 組成 / ingredients · detected4. First-aid measures · detected5. Fire-fighting measures · detected6. Accidental release measures · detected7. Handling and storage · detected8. Exposure controls / PPE · detected9. Physical and chemical properties · detected10. Stability and reactivity · detected11. Toxicological information · detected12. Ecological information · detected13. Disposal considerations · detected14. Transport information · detected15. Regulatory information · detected16. Other information · detected

Normalized physical-property units

Calculated conversions from values detected in this SDS; not independent laboratory measurements.

PropertySDS valueSI conversionUS conversion
Melting point2622 °C2895.15 K4751.6 °F
Boiling point4825 °C5098.15 K8717.0 °F
SDS publisher documentEXTRACTED RESDS parserCALCULATED deterministic conversion / coverageDERIVED same-material index comparison
04 / SPECIFICATIONS

材料・文書仕様

Material
HIMO-1 high-purity molybdenum certified reference material containing certified trace scandium
製品・グレード
HIMO-1; Version 1.0
発行元
National Research Council Canada
国・地域
Canada
ファイル名
himo1-en.pdf
文書の種類
SDS
CAS登録番号
7439-98-7
言語
英語
原本改訂日
2025年7月31日
ページ数
7
ファイルサイズ
237 KB
ダウンロード数
6
追加日
2026-09-13
元素 index needs review
この文書が該当する理由

組成が完全に確認されていない場合があります。記載のない元素が含まれていないとは限りません。

Mo · Identification · ページ 1
Formula : Mo

その他の記載元素: Mo

05 / DOCUMENT TEXT

Full document text

7ページ · 原文書の言語

Text extracted from the original PDF. ページ order and original wording are preserved; tables and symbols may differ from the PDF layout. Check the original PDF for safety-critical details.

ページ 1

HIMO 安全データシート According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2024 and the Hazardous Products Regulations (HPR) WHMIS 2022 Issue date : 2025-07-31 改訂日 : 2025-07-31 Version : 1,0

SECTION 1: Identification

1.1. Product identifier

製品形態 : Substance Substance name : HIMO CAS-No. : 7439-98-7 Formula : Mo Chemical name : molybdenum

1.2. Other means of identification

No additional information available 1.3. おすすめ use and restrictions on use おすすめ use : For research purpose only 1.4. 供給元 National Research Council Canada 1200 Montreal Road Ottawa, K1A 0R6 - Canada T 613-993-2359 1.5. Emergency telephone number Emergency number : CANUTEC 1-613-996-6666

SECTION 2: Hazard(s) identification

2.1. Classification of the substance or mixture

GHS classification Not classified. 2.2. GHS Label elements, including precautionary statements GHS labelling No labelling applicable

2.3. Hazards associated with known or reasonably anticipated uses

No additional information available

2.4. Other hazards which do not result in classification

No additional information available 2.5. Unknown acute toxicity Not applicable

SECTION 3: 組成/information on ingredients

3.1. Substances Name : HIMO CAS-No. : 7439-98-7

Name Product identifier % by weight

Molybdenum CAS-No.: 7439-98-7 100

3.2. 混合物s Not applicable

07/31/2025 EN (英語) 1/7

ページ 2

HIMO 安全データシート According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2024 and the Hazardous Products Regulations (HPR) WHMIS 2022

SECTION 4: First-aid measures

4.1. 説明 of first aid measures First-aid measures after inhalation : If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell. First-aid measures after skin contact : If skin irritation occurs: Wash skin with plenty of water. Obtain medical attention if irritation persists. First-aid measures after eye contact : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. First-aid measures after ingestion : Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. Get medical advice/attention if you feel unwell. 4.2. Most important symptoms and effects (acute and delayed) Symptoms/effects after inhalation : May cause irritation to the respiratory tract. Symptoms/effects after skin contact : May cause skin irritation. Repeated exposure may cause skin dryness or cracking. Symptoms/effects after eye contact : May cause eye irritation. Symptoms may include discomfort or pain, excess blinking and tear production, with possible redness and swelling. Symptoms/effects after ingestion : May be harmful if swallowed. May cause gastrointestinal irritation, nausea, vomiting and diarrhea. 4.3. Immediate medical attention and special treatment, if necessary Symptoms may be delayed. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

SECTION 5: Fire-fighting measures

5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media : Use agents for metal fires (such as: MET-L-X, TEC, or G-1 powder). Class D extinguisher. Unsuitable extinguishing media : Do not use water jet. 5.2. Specific hazards arising from the chemical Explosion hazard : Under abnormal conditions, molybdenum powder or dust may present a fire hazard depending upon particle size, dispersion and exposure to an ignition source(s). Mo wrought metals does not readily burn. When Mo is heated in air above 650, MoO3 sublimes. 5.3. Special protective equipment and precautions for fire-fighters Firefighting instructions : Do not enter fire area without proper protective equipment, including respiratory protection. For large fire: Self-contained breathing apparatus. Protection during firefighting : Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory protection (SCBA).

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures General measures : Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

6.1.1. For non-emergency personnel

No additional information available

2025-07-31 EN (英語) 2/7

ページ 3

HIMO 安全データシート According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2024 and the Hazardous Products Regulations (HPR) WHMIS 2022

6.1.2. For emergency responders

No additional information available Environmental precautions : Prevent entry to sewers and public waters. 6.2. Methods and material for containment and cleaning up For containment : Absorb and/or contain spill with inert material (sand, vermiculite or other appropriate material), then place in suitable container. Do not flush into surface water or sewer system. Wear recommended personal protective equipment. Methods for cleaning up : Sweep or shovel spills into appropriate container for disposal. Provide ventilation. For further information refer to section 8: "Exposure controls/personal protection".

SECTION 7: Handling and storage

7.1. Precautions for safe handling Precautions for safe handling : Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not swallow. Handle and open container with care. When using do not eat, drink or smoke. Hygiene measures : Wash contaminated clothing before reuse. Always wash hands after handling the product. 7.2. Conditions for safe storage, including any incompatibilities Storage conditions : Keep out of the reach of children. Keep container tightly closed. Store in a dry, cool and well-ventilated place.

SECTION 8: Exposure controls/personal protection

8.1. Control parameters

Molybdenum (7439-98-7)

ACGIH - TLV® TWA 10 mg/m³ (inhalable particulate matter) 3 mg/m³ (respirable particulate matter)

OSHA Not applicable

IDLH 5000 mg/m³

NIOSH Not applicable

8.2. Appropriate engineering controls Appropriate engineering controls : Ensure good ventilation of the work station. Environmental exposure controls : Avoid release to the environment. 8.3. Individual protection measures/Personal protective equipment

Hand protection:

Wear suitable gloves. Consult glove manufacturer's product information on material suitability and material thickness.

Eye protection:

Safety glasses or goggles are recommended when using product.

2025-07-31 EN (英語) 3/7

ページ 4

HIMO 安全データシート According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2024 and the Hazardous Products Regulations (HPR) WHMIS 2022

Skin and body protection:

Wear suitable protective clothing

Respiratory protection:

In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. SDSs cannot provide detailed and complete respiratory protection guidelines. Selection of respiratory protection must be done by a qualified person who has assessed the work environment.

Other information: Handle in accordance with good industrial hygiene and safety procedures. Do not eat, drink or smoke when using this product.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties Physical state : Solid (wire) Colour : Grey Odour : No data available Odour threshold : No data available pH : No data available Melting point : 2622 °C / 4751.6 °F Freezing point : No data available Boiling point : 4825 °C / 8717 °F Flash point : No data available Relative evaporation rate (butyl : No data available acetate=1) Flammability : Not Flammable Vapour pressure : 1 mm Hg at 3102 °C / 5615.6 °F Relative vapour density at 20°C / 68 °F : No data available Relative density : No data available Density : 10.2 gm/cc Solubility : Water: Insoluble Partition coefficient n-octanol/water : No data available Auto-ignition temperature : No data available Decomposition temperature : No data available Viscosity, kinematic : No data available Viscosity, dynamic : No data available Explosive limits : No data available Explosive properties : No data available Oxidising properties : No data available

9.2. Other information

No additional information available

2025-07-31 EN (英語) 4/7

ページ 5

HIMO 安全データシート According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2024 and the Hazardous Products Regulations (HPR) WHMIS 2022

SECTION 10: Stability and reactivity

10.1. Reactivity No dangerous reactions known under normal conditions of use. 10.2. Chemical stability Stable under normal conditions. 10.3. Possibility of hazardous reactions No dangerous reactions known under normal conditions of use. 10.4. Conditions to avoid Heat. Incompatible materials. 10.5. Incompatible materials Strong oxidizers; BrF3, ClF3, F2, PbO2

10.6. Hazardous decomposition products

None

SECTION 11: Toxicological information

11.1. Information on toxicological effects

Acute toxicity (oral) : Not classified Acute toxicity (dermal) : Not classified Acute toxicity (inhalation) : Not classified

Molybdenum (7439-98-7)

LD50 dermal rat > 2000 mg/kg bodyweight Animal: rat, Guideline: OECD Guideline 402 (Acute Dermal Toxicity)

LC50 inhalation rat > 5.84 mg/L/4h

Skin corrosion/irritation : Based on available data, the classification criteria are not met. Serious eye damage/irritation : Based on available data, the classification criteria are not met. Respiratory or skin sensitisation : Based on available data, the classification criteria are not met. Germ cell mutagenicity : Based on available data, the classification criteria are not met. Carcinogenicity : Based on available data, the classification criteria are not met. Reproductive toxicity : Based on available data, the classification criteria are not met. STOT-single exposure : Based on available data, the classification criteria are not met. STOT-repeated exposure : Based on available data, the classification criteria are not met. Aspiration hazard : Based on available data, the classification criteria are not met. Symptoms/effects after inhalation : May cause irritation to the respiratory tract. Symptoms/effects after skin contact : May cause skin irritation. Repeated exposure may cause skin dryness or cracking. Symptoms/effects after eye contact : May cause eye irritation. Symptoms may include discomfort or pain, excess blinking and tear production, with possible redness and swelling. Symptoms/effects after ingestion : May be harmful if swallowed. May cause gastrointestinal irritation, nausea, vomiting and diarrhea. Other information : Likely routes of exposure: ingestion, inhalation, skin and eye.

2025-07-31 EN (英語) 5/7

ページ 6

HIMO 安全データシート According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2024 and the Hazardous Products Regulations (HPR) WHMIS 2022

SECTION 12: Ecological information

12.1. Ecotoxicity Ecology - general : May cause long-term adverse effects in the aquatic environment. 12.2. Persistence and degradability

HIMO (7439-98-7)

Persistence and degradability Not established

12.3. Bioaccumulative potential

HIMO (7439-98-7)

Bioaccumulative potential Not established

12.4. Mobility in soil No additional information available

12.5. Other adverse effects

No additional information available

SECTION 13: Disposal considerations

13.1. Disposal methods

Product/Packaging disposal : Dispose of contents/container to hazardous or special waste collection point, recommendations in accordance with local, regional, national and/or international regulation.

SECTION 14: Transport information

14.1. UN number Not regulated for transport 14.2. UN proper shipping name Proper Shipping Name (DOT) : Not applicable Proper Shipping Name (TDG) : Not applicable

14.3. Transport hazard class(es)

DOT Transport hazard class(es) (DOT) : Not applicable

TDG Transport hazard class(es) (TDG) : Not applicable 14.4. Packing group Packing group (DOT) : Not applicable Packing group (TDG) : Not applicable 14.5. Environmental hazards Other information : No supplementary information available.

14.6. Transport in bulk

Not applicable 14.7. Special precautions for user Special transport precautions : Do not handle until all safety precautions have been read and understood.

2025-07-31 EN (英語) 6/7

ページ 7

HIMO 安全データシート According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2024 and the Hazardous Products Regulations (HPR) WHMIS 2022

SECTION 15: Regulatory information

15.1 Federal regulations

All components of this product are listed, or excluded from listing, on the 米国 Environmental Protection Agency Toxic Substances Control Act (TSCA) inventory.

All components of this product are listed, or excluded from listing, on the Canadian DSL (Domestic Substances List) and NDSL (Non-Domestic Substances List) inventories. 15.2. International regulations No additional information available 15.3. US State regulations No additional information available

SECTION 16: Other information

According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2024 and the Hazardous Products Regulations (HPR) WHMIS 2022 Issue date : 2025-07-31 改訂日 : 2025-07-31 Other information : None Version # : 1.0 Prepared by : Nexreg Compliance Inc. www.Nexreg.com

Disclaimer:

The information provided on this 安全データシート is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.

This material is for research and experimental applications only. It is not intended for food, drug, household, agricultural, or cosmetic use. Its use must be supervised by technically qualified individuals with experience in the handling of potentially hazardous chemicals. Apart from the solvent in this product (if applicable), the hazardous components present in the solution are at such low concentrations that exact determination of degree of hazard is not warranted and would be misleading. We shall not be held liable for any damage resulting from handling or from contact with the above product.

2025-07-31 EN (英語) 7/7

06 / OTHER 発行元S

同一材料:他の発行元によるSDS

0 件の文書がこの材料索引にあります。製品グレード、水和状態、配合は各原本PDFで確認してください。

現在、この材料について他の発行元のPDFは収録されていません。

07 / SOURCE COMPANY

原発行元・企業情報

公式サイト確認済み
ブランド・組織
National Research Council Canada
国・地域/事業所
Canada
ウェブサイト
nrc.canada.ca
SDS記載の連絡先メール
記載なし in SDS
SDS記載の電話番号
613-993-2359
製品・参照番号
HIMO-1; Version 1.0
公式ウェブサイトの連絡先お問い合わせページ・ウェブサイト 情報源 · 確認日: 2026-09-14
抽出した供給元情報を表示
HIMO
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2024 and the Hazardous Products Regulations (HPR) WHMIS 2022
Issue date : 2025-07-31          Revision date : 2025-07-31       Version : 1,0

SECTION 1: Identification

1.1. Product identifier
Product form                                                : Substance
Substance name                                          : HIMO
CAS-No.                                                      : 7439-98-7
Formula                                                       : Mo
Chemical name                                            : molybdenum
1.2. Other means of identification
No additional information available
1.3. Recommended use and restrictions on use
Recommended use                                     : For research purpose only
1.4. Supplier
 National Research Council Canada
 1200 Montreal Road
 Ottawa, K1A 0R6 - Canada
 T 613-993-2359
1.5. Emergency telephone number

RESDSについて National Research Council Canada

National Research Council Canada is the organization attributed as publisher or supplier of this SDS. See the original identification section and official website for its company profile.

Company website & profile
文書の出典・収録履歴

原登録: HIMO-1 High Purity Molybdenum Certified Reference Material – 安全データシート

追加日: 2026-09-13T23:05:09.000Z · 登録更新: 2026-09-14T02:29:00.557Z

原本ファイル SHA-256: 8f4716683247b2df8b4ac21275434afbdfb639be0cdb822b39b0ffbbb2093c20

原典PDF

訂正・文書更新を依頼

メタデータの誤り、抽出エラー、供給元による新版、権利上の問題を報告できます。報告内容は運営者が確認するため非公開で保存され、送信しただけで公開中のSDSが直ちに変更されることはありません。

報告内容と任意のメールアドレスは、対応のため非公開で保存されます。サイト上には公開されません。機密情報や個人の重要情報を入力しないでください。

08 / OFFICIAL REFERENCES

公式化学物質情報源

情報源ガイド ↗

このSDSに記載されたCAS番号です。以下の性質は個々の物質に関するもので、製品全体を示すとは限りません。混合物、グレード、水和状態については原本SDSをご確認ください。

CAS 7439-98-7化学物質の参考情報・情報源リンク
化学物質名(IUPAC)
PubChemで確認 ↗

この参考リンクを開くと、PubChemで公開されている物性情報を取得できます。公式検索リンクは引き続き利用できます。

GHSは分類基準を示すものです。適用される危険有害性分類は、対象製品および各法域について個別に確認してください。

09 / 材料名 SUPPLIERS

この材料の供給元

該当材料のSDSと公式製品ページから確認した企業です。グレード、組成、供給状況は供給元へ直接ご確認ください。確認できない連絡先は推測して掲載しません。

この材料について、追加の供給元はまだ確認されていません。

ウェブでその他の供給元を検索
10 / GLOBAL SEARCH

この材料を複数の検索エンジンで検索

検索語: HIMO-1 high-purity molybdenum certified reference material containing certified trace scandium SDS

11 / WIKIPEDIA

Wikipediaによる材料の基礎情報

Wikipediaで HIMO-1 high-purity molybdenum certified reference material containing certified trace scandium を検索します。該当記事がある場合は概要を表示します。製品固有の混合物や標準物質には専用記事がない場合があります。

Wikipediaでこの材料を検索 ↗

Access logs & privacy