Ytterbium (III) acetate hydrate 3789 SDS

SECTION 1 PRODUCT AND COMPANY INFORMATION

PRODUCT NAME: Ytterbium (III) acetate hydrate

PRODUCT NO: 3789

CAS NO: 15280-58-7

SYNONYMS: Acetic acid, ytterbium (+3) salt, hydrate

MANUFACTURER:

ProChem, Inc. PHONE: 815-398-1788 826 Roosevelt Road FAX: 815-398-1810 Rockford, IL 61109 TOLL FREE: 800-795-8788

IN CASE OF TRANSPORTATION EMERGENCY CONTACT CHEM-TREC: 1-800-424-9300

SECTION 2 HAZARDS IDENTIFICATION

CLASSIFICATION OF SUBSTANCE OR MIXTURE

Not a dangerous substance according to the GHS

HMIS CLASSIFICATION: Health: 0 Flammability: 0 Reactivity: 0 NFPA RATING: Health: 0 Fire: 0 Reactivity Hazard: 0

EYE CONTACT: Causes slight to mild irritation of the eyes. SKIN CONTACT: Causes slight to mild irritation of the skin. INHALATION: Irritating to the nose, mucous membranes, and respiratory tract. INGESTION: May be harmful if swallowed.

SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS

Formula: Yb(OOCCH3)3 !XH2O

Molecular Weight: 350.16 (anhy.)

CHEMICAL NAME CAS# % ACGIH (TWA) OSHA (PEL)

Ytterbium (III) acetate hydrate 15280-58-7 100 No data No data

YTTERBIUM (III) ACETATE HYDRATE PAGE 1

SECTION 4 FIRST AID MEASURES

EYE EXPOSURE: Immediately flush the eyes with copious amounts of water for at least 15 minutes. Assure flushing under eyelids. A victim may need assistance in keeping their eyelids open. Get immediate competent medical attention. SKIN EXPOSURE: Wash affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists. INHALATION: Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases, seek immediate medical assistance. INGESTION: Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious).

SECTION 5 FIREFIGHTING MEASURES

FLASH POINT: Not applicable AUTO IGNITION TEMPERATURE: Not applicable EXPLOSION LIMITS: Not applicable EXTINGUISHING MEDIUM: Carbon dioxide, dry powder, or foam. SPECIAL FIRE FIGHTING PROCEDURES: If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing. HAZARDOUS COMBUSTION AND DECOMPOSITION PRODUCTS: Carbon oxides and ytterbium oxide.

SECTION 6 ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS: Avoid dust formation. Avoid breathing dust, vapors, mist, or gas. Ensure adequate ventilation. ENVIRONMENTAL PRECAUTIONS: Do not let product enter drains or allow to be released into the environment. METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP: Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7 HANDLING AND STORAGE

PRECAUTIONS FOR SAFE HANDLING: Provide appropriate exhaust ventilation at places where dust is formed. CONDITIONS FOR SAFE STORAGE: Keep container tightly closed in a dry and well-ventilated place.

SECTION 8 EXPOSURE CONTROLS AND PERSONAL PROTECTION

EYE PROTECTION: Always wear approved safety glasses with side shields, safety goggles, or face shield when handling a chemicals substance in the laboratory. SKIN PROTECTION: Chemical resistant gloves. VENTILATION: If possible, handle the material in an efficient fume hood. RESPIRATOR: If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 19-10.134.

SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES

COLOR AND FORM: White powder MELTING POINT: No data available BOILING POINT: No data available MOLECULAR WEIGHT: 350.16 (anhy.) ODOR: Odorless SPECIFIC GRAVITY: 2.09 VAPOR PRESSURE: Not applicable SOLUBILITY IN WATER: Very soluble

YTTERBIUM (III) ACETATE HYDRATE PAGE 2

SECTION 10 STABILITY AND REACTIVITY

STABILITY: Stable under normal conditions. HAZARDOUS POLYMERIZATION: No hazardous polymerization CONDITIONS TO AVOID: Excess heat. INCOMPATIBILITY: Strong oxidizing agents, acids, and bases. DECOMPOSITION PRODUCTS: Carbon oxides and ytterbium oxide.

SECTION 11 TOXICOLOGICAL DATA

CARCINOGENIC EFFECTS: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen. MUTAGENIC EFFECTS: No data TETRATOGENIC EFFECTS: No data

To the best of our knowledge the toxicological effects of this compound have not been fully investigated.

SECTION 12 ECOLOGICAL DATA

No information available

SECTION 13 DISPOSAL CONSIDERATIONS

Dispose of in according to local, state, and federal regulations.

SECTION 14 TRANSPORTATION DATA

Non-hazardous material

SECTION 15 REGULATORY INFORMATION

TSCA: Not listed in the TSCA Inventory SARA 302 COMPONENTS: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. SARA (TITLE 313): This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. SARA 311/312 HAZARDS: No SARA Hazards MASSACHUSETTS RIGHT TO KNOW COMPONENETS: No components are subject to the Massachusetts Right to Know Act. CALIFORNIA PROP. 65 COMPONENTS: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

SECTION 16 OTHER INFORMATION

DISCLAIMER: The information herein is believed to be accurate and reliable as of the date compiled. However, ProChem, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information in this document or any use of the product based on the information. DATE REVISED: 08/25 SDS DEPT.

YTTERBIUM (III) ACETATE HYDRATE PAGE 3