Yttrium, AAS standard solution, Specpure®, Y 1000µg/ml ALFAA88117 SDS

Page 1 / 8 SAFETY DATA SHEET Revision Date 05-Aug-2026 Version 5

ALFAA88117

Yttrium, AAS standard solution, Specpure®, Y 1000µg/ml

SECTION 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

产品说明:产品说明:产品说明:产品说明: 钇,钇,钇,钇,AAS标准溶液,AAS标准溶液,AAS标准溶液,AAS标准溶液,Specpure®,Specpure®,Specpure®,Specpure®,YYYY1000€μg/ml1000€μg/ml1000€μg/ml1000€μg/ml Product Description: Yttrium, AAS standard solution, Specpure®, Y 1000µg/ml

Cat No. : 88117 Molecular Formula Y2 O3 in 5% HN O3

Supplier Avocado Research Chemicals Ltd. (Part of Thermo Fisher Scientific) Shore Road, Heysham Lancashire, LA3 2XY, United Kingdom Office Tel: +44 (0) 1524 850506 Office Fax: +44 (0) 1524 850608

Emergency Telephone Number For information US call: 001-800-227-6701 / Europe call: +32 14 57 52 11 Emergency Number US:001-201-796-7100 / Europe: +32 14 57 52 99 CHEMTREC Tel. No. US:001-800-424-9300 / Europe:001-703-527-3887

E-mail address begel.sdsdesk@thermofisher.com

Recommended Use Laboratory chemicals. Uses advised against No Information available

SECTION 2. HAZARD IDENTIFICATION

Physical State Appearance Odor Liquid No information available Characteristic

Emergency Overview Causes severe skin burns and eye damage. May be corrosive to metals.

Classification of the substance or mixture

Substances/mixtures corrosive to metal Category 1 Skin Corrosion/Irritation Category 1 A Serious Eye Damage/Eye Irritation Category 1

Label Elements

Signal Word Danger

Hazard Statements H290 - May be corrosive to metals ______________________________________________________________________________________________ Page 1

ALFAA88117 SAFETY DATA SHEET Revision Date 05-Aug-2026Page 2 / 8 Yttrium, AAS standard solution, Specpure®, Y 1000µg/ml ______________________________________________________________________________________________ H314 - Causes severe skin burns and eye damage

Precautionary Statements Prevention P234 - Keep only in original packaging P264 - Wash face, hands and any exposed skin thoroughly after handling P271 - Use only outdoors or in a well-ventilated area P280 - Wear protective gloves/protective clothing/eye protection/face protection Response P301 + P330 + P331 - IF SWALLOWED: rinse mouth. Do NOT induce vomiting P303 + P361 + P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P310 - Immediately call a POISON CENTER or doctor P390 - Absorb spillage to prevent material damage P362 + P364 - Take off contaminated clothing and wash it before reuse Storage P402 - Store in a dry place P403 + P233 - Store in a well-ventilated place. Keep container tightly closed P406 - Store in corrosion resistant polypropylene container with a resistant inliner Disposal P501 - Dispose of contents/ container to an approved waste disposal plant

Physical and Chemical Hazards May be corrosive to metals. Health Hazards Corrosive. Causes skin and eye burns. Causes serious eye damage. Environmental hazards Contains no substances known to be hazardous to the environment or not degradable in waste water treatment plants.

This product does not contain any known or suspected endocrine disruptors.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Component CAS No Weight % Water 7732-18-5 94.87 Nitricacid…% [C≤70%] 7697-37-2 5 Yttrium oxide (Y2O3) 1314-36-9 0.13

SECTION 4. FIRST AID MEASURES

General Advice Show this safety data sheet to the doctor in attendance. Immediate medical attention is required.

Eye Contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required.

Skin Contact Wash off immediately with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Call a physician immediately.

Inhalation If not breathing, give artificial respiration. Remove from exposure, lie down. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Call a physician immediately.

Ingestion Do NOT induce vomiting. Clean mouth with water. Never give anything by mouth to an unconscious person. Call a physician immediately. ______________________________________________________________________________________________ Page 2

ALFAA88117 SAFETY DATA SHEET Revision Date 05-Aug-2026Page 3 / 8 Yttrium, AAS standard solution, Specpure®, Y 1000µg/ml ______________________________________________________________________________________________

Most important symptoms and effects Causes burns by all exposure routes. Product is a corrosive material. Use of gastric lavage or emesis is contraindicated. Possible perforation of stomach or esophagus should be investigated: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation

Self-Protection of the First Aider Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination.

Notes to Physician Treat symptomatically.

SECTION 5. FIRE-FIGHTING MEASURES

Suitable Extinguishing Media CO 2, dry chemical, dry sand, alcohol-resistant foam.

Extinguishing media which must not be used for safety reasons No information available.

Specific Hazards Arising from the Chemical Thermal decomposition can lead to release of irritating gases and vapors. The product causes burns of eyes, skin and mucous membranes.

Protective Equipment and Precautions for Firefighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Thermal decomposition can lead to release of irritating gases and vapors.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal Precautions Ensure adequate ventilation. Use personal protective equipment as required. Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak.

Environmental Precautions Should not be released into the environment. See Section 12 for additional Ecological Information.

Methods for Containment and Clean Up Soak up with inert absorbent material. Keep in suitable, closed containers for disposal.

Refer to protective measures listed in Sections 8 and 13.

SECTION 7. HANDLING AND STORAGE

Handling Wear personal protective equipment/face protection. Do not get in eyes, on skin, or on clothing. Use only under a chemical fume hood. Do not breathe mist/vapors/spray. Do not ingest. If swallowed then seek immediate medical assistance.

Storage Corrosives area. Keep containers tightly closed in a dry, cool and well-ventilated place.

Specific Use(s) Use in laboratories

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

______________________________________________________________________________________________ Page 3

ALFAA88117 SAFETY DATA SHEET Revision Date 05-Aug-2026Page 4 / 8 Yttrium, AAS standard solution, Specpure®, Y 1000µg/ml ______________________________________________________________________________________________

Control Parameters

Component China ACGIH TLV OSHA PEL NIOSH Nitricacid…% [C≤70%] - TWA: 2 ppm (Vacated) TWA: 2 ppm IDLH: 25 ppm STEL: 4 ppm (Vacated) TWA: 5 mg/m3 REL = 2 ppm (TWA) (Vacated) STEL: 4 ppm REL = 5 mg/m3 (TWA) (Vacated) STEL: 10 mg/m3 STEL: 4 ppm TWA: 2 ppm STEL: 10 mg/m3 TWA: 5 mg/m3 Yttrium oxide (Y2O3) - TWA: 1 mg/m3 IDLH: 500 mg/m3 REL = 1 mg/m3 (TWA)

Component Hong Kong Thailand European Union The United Kingdom Nitricacid…% [C≤70%] TWA: 2 ppm TWA: 2 ppm STEL: 1 ppm (15min) STEL: 1 ppm 15 min TWA: 5.2 mg/m3 STEL: 2.6 mg/m3 (15min) STEL: 2.6 mg/m3 15 min STEL: 4 ppm STEL: 10 mg/m3

Legend

ACGIH - American Conference of Governmental Industrial Hygienists OSHA - Occupational Safety and Health Administration NIOSH: NIOSH - National Institute for Occupational Safety and Health

Exposure Controls

Engineering Measures Ensure that eyewash stations and safety showers are close to the workstation location. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source.

Personal protective equipment

Eye Protection Goggles (European standard - EN 166)

Hand Protection Protective gloves

Glove material Breakthrough time Glove thickness EU standard Glove comments Natural rubber See manufacturers - EN 374 (minimum requirement) Nitrile rubber recommendations Neoprene PVC Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information) Ensure gloves are suitable for the task: Chemical compatability, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.

Skin and body protection Long sleeved clothing

Respiratory Protection When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly

Large scale/emergency use Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced Recommended Filter type: Particulates filter conforming to EN 143

Small scale/Laboratory use Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended half mask:- Particle filtering: EN149:2001 ______________________________________________________________________________________________ Page 4

ALFAA88117 SAFETY DATA SHEET Revision Date 05-Aug-2026Page 5 / 8 Yttrium, AAS standard solution, Specpure®, Y 1000µg/ml ______________________________________________________________________________________________ When RPE is used a face piece Fit Test should be conducted

Hygiene Measures Handle in accordance with good industrial hygiene and safety practice.

Environmental exposure controls No information available.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance Physical State Liquid

Odor Characteristic Odor Threshold No data available pH No information available Melting Point/Range No data available Softening Point No data available Boiling Point/Range approx 100 °C / 212 °F Flash Point No information available Method - No information available Evaporation Rate No data available Flammability (solid,gas) Not applicable Liquid Explosion Limits No data available

Vapor Pressure No data available Vapor Density No data available (Air = 1.0) Specific Gravity / Density 1 g/cm3 @ 20 °C Bulk Density Not applicable Liquid Water Solubility No information available Solubility in other solvents No information available Partition Coefficient (n-octanol/water) Component log Pow Nitricacid…% [C≤70%] -2.3 Autoignition Temperature No data available Decomposition Temperature No data available Viscosity No data available Explosive Properties No information available Oxidizing Properties No information available

Molecular Formula Y2 O3 in 5% HN O3

SECTION 10. STABILITY AND REACTIVITY

Stability Stable under normal conditions.

Hazardous Reactions None under normal processing. Hazardous Polymerization No information available.

Conditions to Avoid None known.

Materials to avoid No information available.

Hazardous Decomposition Products None under normal use conditions.

SECTION 11. TOXICOLOGICAL INFORMATION

Product Information

(a) acute toxicity; ______________________________________________________________________________________________ Page 5

ALFAA88117 SAFETY DATA SHEET Revision Date 05-Aug-2026Page 6 / 8 Yttrium, AAS standard solution, Specpure®, Y 1000µg/ml ______________________________________________________________________________________________ Toxicology data for the components

Component LD50 Oral LD50 Dermal LC50 Inhalation Water - - - Nitricacid…% [C ≤70%] LC50 = 2500 ppm. (Rat) 1h Yttrium oxide (Y2O3) LC50 > 5.09 mg/L ( Rat ) 4 h

(b) skin corrosion/irritation; Category 1 B

(c) serious eye damage/irritation; Category 1

(d) respiratory or skin sensitization; Respiratory No data available Skin No data available

(e) germ cell mutagenicity; No data available

(f) carcinogenicity; No data available

There are no known carcinogenic chemicals in this product

(g) reproductive toxicity; No data available

(h) STOT-single exposure; No data available

(i) STOT-repeated exposure; No data available

Target Organs No information available.

(j) aspiration hazard; No data available

Symptoms / effects,both acute and Product is a corrosive material. Use of gastric lavage or emesis is contraindicated. delayed Possible perforation of stomach or esophagus should be investigated: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation

SECTION 12. ECOLOGICAL INFORMATION

Ecotoxicity effects .

Persistence and Degradability No information available

Bioaccumulative Potential No information available

Component log Pow Bioconcentration factor (BCF) Nitricacid…% [C ≤70%] -2.3 No data available

Mobility in soil No information available

Endocrine Disruptor Information This product does not contain any known or suspected endocrine disruptors Persistent Organic Pollutant This product does not contain any known or suspected substance

______________________________________________________________________________________________ Page 6

ALFAA88117 SAFETY DATA SHEET Revision Date 05-Aug-2026Page 7 / 8 Yttrium, AAS standard solution, Specpure®, Y 1000µg/ml ______________________________________________________________________________________________ Ozone Depletion Potential This product does not contain any known or suspected substance

SECTION 13. DISPOSAL CONSIDERATIONS

Waste from Residues/Unused Waste is classified as hazardous. Dispose of in accordance with the European Directives Products on waste and hazardous waste. Dispose of in accordance with local regulations.

Contaminated Packaging Dispose of this container to hazardous or special waste collection point.

Other Information Waste codes should be assigned by the user based on the application for which the product was used. Do not empty into drains. Do not flush to sewer. Large amounts will affect pH and harm aquatic organisms.

SECTION 14. TRANSPORT INFORMATION

Road and Rail Transport

UN-No UN3264 Proper Shipping Name Corrosive liquid, acidic, inorganic, n.o.s. Technical Shipping Name (Nitric acid) Hazard Class 8 Packing Group III

IMDG/IMO

UN-No UN3264 Proper Shipping Name Corrosive liquid, acidic, inorganic, n.o.s. Technical Shipping Name (Nitric acid) Hazard Class 8 Packing Group III

IATA

UN-No UN3264 Proper Shipping Name Corrosive liquid, acidic, inorganic, n.o.s. Technical Shipping Name (Nitric acid) Hazard Class 8 Packing Group III

Special Precautions for User No special precautions required

SECTION 15. REGULATORY INFORMATION

International Inventories X = listed, China (IECSC), Europe (EINECS/ELINCS/NLP), U.S.A. (TSCA), Canada (DSL/NDSL), Philippines (PICCS), Japan (ENCS), Japan (ISHL), Australia (AICS), Korea (KECL).

Component The List of IECSC EINECS TSCA DSL PICCS ENCS ISHL AICS KECL Inventory of dangerous Hazardous goods GB Chemicals 12268 - (2015 2012 Edition) Water - - X 231-791-2 X X X X X KE-35400 Nitricacid…% [C≤70 X X X 231-714-2 X X X X X X KE-25911 %] Yttrium oxide (Y2O3) - - X 215-233-5 X X X X X X KE-35504

______________________________________________________________________________________________ Page 7

ALFAA88117 SAFETY DATA SHEET Revision Date 05-Aug-2026Page 8 / 8 Yttrium, AAS standard solution, Specpure®, Y 1000µg/ml ______________________________________________________________________________________________

National Regulations

SECTION 16. OTHER INFORMATION

Prepared By Health, Safety and Environmental Department Revision Date 05-Aug-2026 Revision Summary Not applicable.

Training Advice Chemical hazard awareness training, incorporating labelling, Safety Data Sheets (SDS), Personal Protective Equipment (PPE) and hygiene. Use of personal protective equipment, covering appropriate selection, compatibility, breakthrough thresholds, care, maintenance, fit and standards. First aid for chemical exposure, including the use of eye wash and safety showers.

Legend

CAS - Chemical Abstracts Service TSCA - United States Toxic Substances Control Act Section 8(b) Inventory EINECS/ELINCS - European Inventory of Existing Commercial Chemical DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances/EU List of Notified Chemical Substances Substances List PICCS - Philippines Inventory of Chemicals and Chemical Substances ENCS - Japanese Existing and New Chemical Substances IECSC - Chinese Inventory of Existing Chemical Substances AICS - Australian Inventory of Chemical Substances KECL - Korean Existing and Evaluated Chemical Substances NZIoC - New Zealand Inventory of Chemicals

WEL - Workplace Exposure Limit TWA - Time Weighted Average ACGIH - American Conference of Governmental Industrial Hygienists IARC - International Agency for Research on Cancer DNEL - Derived No Effect Level PNEC - Predicted No Effect Concentration RPE - Respiratory Protective Equipment LD50 - Lethal Dose 50% LC50 - Lethal Concentration 50% EC50 - Effective Concentration 50% NOEC - No Observed Effect Concentration POW - Partition coefficient Octanol:Water PBT - Persistent, Bioaccumulative, Toxic vPvB - very Persistent, very Bioaccumulative

ICAO/IATA - International Civil Aviation Organization/International Air IMO/IMDG - International Maritime Organization/International Maritime Transport Association Dangerous Goods Code ADR - European Agreement Concerning the International Carriage of MARPOL - International Convention for the Prevention of Pollution from Dangerous Goods by Road Ships OECD - Organisation for Economic Co-operation and Development ATE - Acute Toxicity Estimate BCF - Bioconcentration factor VOC - (Volatile Organic Compound)

Key literature references and sources for data https://echa.europa.eu/information-on-chemicals Suppliers safety data sheet, Chemadvisor - LOLI, Merck index, RTECS

Physical hazards On basis of test data Health Hazards Calculation method Environmental hazards Calculation method

Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text

End of Safety Data Sheet

______________________________________________________________________________________________ Page 8